CCT FR 105 is a high charge, high molecular weight anionic friction reducer designed to be added “on-the-fly” to fresh water to moderate brines (”slickwater fracs”). Typical dosages range from 0.25 to 1.0 gallon per 1000 gallons of fluid with reduction in friction pressures by as much as 80% versus fresh water. TDS Range: 0-50K

CCT FR 105A is a high charge, high molecular weight anionic friction reducer designed to be added “on-the-fly” to fresh water to moderate brines (”slick water fracs”). Typical dosages range from 0.25 to 1.0 gallon per 1000 gallons of fluid with reduction in friction pressures by as much as 80% versus fresh water.

FR 150 is a medium charge, high molecular weight anionic friction reducer designed to be added “on -the-fly” to moderate to heavy brines. Typical dosages range from 0.25 to 1.0 gallon per 1000 gallons of fluid with reduction in friction pressures by as much as 80% versus fresh water. TDS Range: 50-100K

FR 200 is a medium charge, high molecular weight anionic, iron tolerant friction reducer designed to be added “on-the-fly” to heavy brines. Typical dosages range from 0.50 to 1.0 gallon per 1000 gallons of fluid with reduction in friction pressures by as much as 80% versus fresh water. TDS Range: 100-150K + Iron Tolerant

FR 200C is a medium charge, high molecular weight cationic, iron tolerant friction reducer designed to be added “on-the-fly” to heavy brines. Typical dosages range from 0.50 to 1.0 gallon per 1000 gallons of fluid with reduction in friction pressures by as much as 80% versus fresh water. TDS Range: 150-300K + Iron Tolerant

FR 300C is a low charge, high molecular weight cationic friction reducer designed for use in water-based fracturing fluids, acids, and brines. FR 300C can reduce friction by greater than 60% at dosages as low as ¼ gallon per 1000 gallons of fluid. Because it is a cationic polymer, FR 300C is compatible with both nonionic and cationic additives for multi-system use.

CCT FR 50 HV is a fast-hydrating high viscosity, emulsion friction reducer with 40% high molecular weight PolyAcrylaMide (PAM) loading for stimulation fluids for both fresh water and brines with low to medium salinity. It generates high viscosity to carry proppant, it reduces friction pressure in excess of 70%. As a high loading solid powder slurry, FR 50HV has significant logistic and storage benefits. It hydrates rapidly in fresh water and in typical light brine solutions to achieve maximum performance in less than three minutes. This is particularly useful for well stimulation where additions by “on-the-fly” operations are demanded. TDS Range: <25K

FR-220HV is an emulsion liquid anionic polymer friction reducer designed for coil tubing and frac jobs. FR-220HV is a high vis high brine FR. FR-220HV will invert almost instantly to yield maximum friction reduction when added to well fracture water. At pump rates of 40 to 120 bbls/min the product reduces friction in a typical Fresh/PW frac water, 2% KCl water and CaCl2 brine by up to 70% in about 5-30 seconds. The FR-220HV is formulated to deal with high salt concentrations, managing high friction reduction in brine environment, allowing for frac water reuse, able to create a laminar flow in frac fluids, reducing turbulent flow which creates frictional pressure. The FR-220HV is best applied in fresh water or low chloride (2% KCl) water to generate high viscosity. The oil carrier used to support the polymer is a very low aromatic content oil (ND0, reducing concerns over the presence of BTEX in water.

FR-240HV is low charge, high molecular anionic friction reducer designed to be added “on-the fly” to water to very heavy brines (“slick water fracs”). Typical dosages range from ¼ to 1 gallon per 1000 gallons of fluid with reduction in friction pressures by as much as 80% versus fresh water. FR-240HV is a single component emulsion polymer that can be pre-diluted with water prior to use but because it is a rapid yielding product it is usually fed “on-the fly”. Data compiled in our friction loop show that FR-240HV added at 0.5gal/1000 gal can maintain 60% friction reduction while standard friction reducers are only able to achieve 25-30% at these dosage levels. TDS Range: <50K

FR-350HV is an emulsion liquid anionic polymer friction reducer. FR 350HV is a high vis high brine FR. FR 350HV will invert almost instantly to yield maximum friction reduction when added to well fracture water. At pump rates of 40 to 120 bbls/min the product reduces friction in a typical frac water (~2% KCl water) by up to 70% in about 5-30 seconds. The FR 350HV is formulated to deal with high salt concentrations, managing high friction reduction in brine environment, allowing for frac water reuse, able to create a laminar flow in frac fluids, reducing turbulent flow which creates frictional pressure. The FR 350HV is best applied in fresh water or low chloride (2% KCl) water to generate high viscosity. The oil carrier used to support the polymer is a very low aromatic content oil (ND0, reducing concerns over the presence of BTEX in water. TDS Range: <50K

High Visc High brine iron tolerant, cationic. TDS Range: >100K + Iron Tolerant

DFR 80HV is a fast-hydrating, high viscosity, dry friction reducer (DFR) 4 lb slurry for stimulation fluids in both fresh water and brines with low to medium salinity. It generates high viscosity to carry proppant, it reduces friction pressure in excess of 70%. As a high loading solid powder slurry, DFR-80HV has significant logistic and storage benefits. It hydrates rapidly in fresh water and in typical light brine solutions to achieve maximum performance in less than three minutes. This is particularly useful for well stimulation where additions by “on-the-fly” operations are demanded. TDS Range: <150K

FR-1200HV is designed for the toughest produced water applications with high brine and iron. It is a fast-hydrating, slurry friction reducer with 45-50% high molecular weight Polyacrylamide (PAM) loading for stimulation fluids in both fresh water and brines with low to high salinity. Very high APMS loading helps this PAM to sustain harsh conditions and offers excellent elasticity for proppant transportation. TDS Range: >150K

DFR 300 is a fast-hydrating, concentrated high-performance dry friction reducer (DFR) for stimulation fluids in both fresh water to medium brine. With a low dosage (1 to 2 pptg), it reduces friction pressure in excess of 70%. as a solid powder product, DFR 300 has significant logistic and storage benefits. The DFR 300 hydrates rapidly in fresh water and in typical light brine solutions to achieve maximum performance in 2 minutes or less. This is particularly useful for well stimulation where fast product dissolution is required. This dry friction reducer can be fully activated when mixed with fresh water or brines with low to high salinity.

DFR 700 HV is a high viscosity polymer that is useful in thickening hydrochloric acid, brines or fresh water. It shares the excellent high temperature stability. The powder form DFR-700 HV is particularly effective as a friction reducer in fresh water, various brines and in hydrochloric acid and has been widely used for that purpose.